With LED lighting becoming the norm, more people are becoming aware of the benefits of upgrading outdated lighting. However, this does not mean the switch is always straight-forward; there’s room for error. To avoid these issues, check out these common mistakes first-time LED users tend to make.
Assuming your fixture accepts LED bulbs.
Think of any light bulb imaginable; chances are there’s an LED replacement. There are numerous terms to describe the usability of these products. You may see terms like “ballast compatible”, “plug and play”, "instant fit" or “direct wire”. Ballast compatible, plug and play and instant fit all essentially mean the same – remove your current bulb and simply replace it with its LED counterpart. If you have a direct wire LED bulb, you will need to remove the ballast, or power supply, and hard-wire the LED bulb and socket. Always read the manufacturer’s specifications and your fixture’s guidelines to ensure the proper use and acceptance.
Not taking light output into account.
When replacing standard light bulbs, we are accustomed to comparing the wattage and finding one that matches the light output we are looking for. With LED bulbs, the comparison is not always so simple. To get a more accurate LED replacement, you must check the lumen output, or the amount of visible light a bulb emits. For example, a 60 watt A19 bulb – think the standard light bulb in your home – produces about 800 lumens. Its LED counterpart that produces the same number of lumens will use, on average, only 10 watts. Learn more about lumen comparison here.
Choosing the wrong color temperature.
Identifying the right color temperature, measured in Kelvin, is important when lighting a room. Color temperature has nothing to do with the actual heat a bulb produces, but rather the color tone of the bulb – ranging from warm to cool to daylight. For some bulbs, it’s simple to figure out their color temperature as it is stamped on the bulb itself. However, some will not be so obvious. For example, if you are replacing an incandescent bulb with an LED and want it to emit the same warmness, choose a bulb with a Kelvin rating of 2200K-2700K. For halogen bulbs, choose a color temperature around 3000K-3200K, as most halogens have a warm color tone.
Not considering the light pattern the bulb will produce.
When choosing an LED replacement bulb, be sure to check the beam angle and light pattern. Not all light bulbs are omni-directional; meaning the light shines in all directions. Also, not all bulbs will project the same light pattern you’re aiming for. For example, an A19 bulb is omni-directional and is great for general lighting purposes. Whereas a PAR-shaped bulb is highly directional and is ideal for highlighting landscape elements in front of your home. Bulbs can also have different beam spreads that can vary from narrow to wide, depending on their application.
Not using a compatible dimmer.
Incandescent and halogen bulbs are fundamentally dimmable with any dimmer switch as long as the voltage and wattage requirements are met. However, not all dimmer switches are compatible with LED bulbs and not all LED bulbs are dimmable. If you experience flickering, strobing, unresponsive bulbs, or bulbs that turn off before reaching the lowest dimming range, it’s likely that your dimmer is not compatible with your LED bulb. Ensure that you are using an LED dimmer so the bulbs function properly.
Not doing your research.
With the demand for LED products on a steep incline, it seems there are new companies popping up each day with the “latest and greatest” technology. However, many of these products are made in foreign countries with no direct customer service – making returns of damaged or defective products nearly impossible. Many of these new companies are not reputable and may be producing low quality products that will fail quickly. Research the brands and companies you are ordering from and be aware of their history, return policy, warranties and customer reviews.
With so many LED options on the market, it can be hard to make the right decision. Let us give you a hand. Lighting Supply been around for 35 years and we're focused on strong customer support and selling trusted brands. Our knowledgeable Customer Service Representatives are here to help guide you in the right direction. Give them a call at 877.231.2852 or leave a comment below.
When you start to look up and pay attention to the lighting around you, you’ll notice recessed lights are a very popular choice – residentially and commercially. Homes can use dozens of these fixtures; commercially, there could be hundreds. Recessed lighting is flush with the ceiling where the housing is hidden. These fixtures are comprised of three parts: the housing, trim and bulb. This trim is the decorative, finished part of the fixture that we see, and the housing is installed inside the opening in the ceiling. There are many different bulbs that be used in recessed lighting fixtures including incandescent, compact fluorescent (CFL) and LED.
Maintaining those recessed lights can be daunting and burdensome, not to mention the high energy costs if you’re still using incandescent bulbs. Even if you are using LED bulbs, they only have an average life of about 25,000 hours. Upgrade your recessed lighting with an LED retrofit kit, doubling the LED life with an average life of about 50,000 hours. These fixtures have an integrated driver, or power supply, and trim. The LED retrofit unit fits right into the existing housing. Install a recessed retrofit kit in a fraction of the time it takes to mount a conventional fixture.
Quick, simple steps to retrofit your recessed cans:
*Note: Disconnect all electricity to the room you are working in. Use a voltage meter to ensure there is no power coming into the fixture before proceeding. As always, if you are not comfortable working with electricity, contact a professional electrician.
Lighting Supply offers many reputable brands that are carrying their own lines of recessed retrofit kits, including TCP and FEIT. These kits come in different color temperatures, sizes and styles such as the standard flush look and gimbal – a lens that can be adjusted to highlight features of your home or business. There are even wet location rated options so you can upgrade the lights in your bathroom and shower.
Still have questions? Give our knowledgeable Customer Service team a call at 877.231.2852. Our representatives will help you narrow down your choices to find the perfect LED retrofit kit for your application. You can also contact us here or leave a comment below.
Popular Blog Posts
Direct Wire LED Tubes vs. LED Tubes w/ Ballasts
Do LED Bulbs Interfere w/ Garage Door Openers?
Your Guide To Finding the Right Bulb
Replacing Your Fixture's Glass Shade
LS Case Study: Washtenaw County Road Commissions Upgrade to LED Lighting
How to Light Your Warehouse Effectively